Click image to view full size image
Tcp/Ip 125Khz Wiegand26 EM-ID door access control rfid reader system
What is the Specifications of our Keypad Card Reader?- Less than 0.2 second Response Speed
- Less than 0.5 seconds Proximity Time Distance
- 2-15cm Proximity Range
- Support EM-ID 125Khz card or keyfob
- Built-in Antenna
- Built-in LED (Double Color LED)
- Built-in Loud Speaker (Buzzer)
- DC 12V Working Voltage,70mA Working Current
- 100 Meters Communication Distance
- Real Time Data Transfer
- Dark Grey Color
- PVC Case Material
- 108mm*88mm*32m
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 12V
Black GND
Green D0
White D1
Blue LED
Yellow Beeper
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Application 
Contact us 
Reader Photo
Wire connection
